Coagulation of silver halide sols by thorium nitrate in the presence of potassium nitrate and potassium sulfate

Summary When silver iodide, silver bromide and silver chloride solsin statu nascendi are coagulated by thorium nitrate in the presence of potassium nitrate, three coagulation maxima appear. Two of them are identical with maxima that are found in absence of KNO₃, denoted with (II) and (IV) in fig. 1. The new maximum appears in the stability region of recharged sols (III). It is believed that this maximum is also—as maximum (IV)—caused by the coagulation of recharged silver halide sols by nitrate ions. Appearance of two nitrate coagulation maxima is explained by different charge densities on sol particles at various concentrations of Th(NO₃)₄ where they are formed. The new maximum indicates a lower charge density of sol particles. The possibility that the new maximum could have been caused by ionic complex species between thorium and nitrate ions has been rejected for data are available that the equilibrium constant for such complexes is small. In the presence of K₂SO₄ the coagulation effects of thorium nitrate on silver halide sols are markedly different. In acidified solutions only one coagulation maximum appears at rather high thorium nitrate concentrations [∼ 10⁻³ N Th (NO₃)₄] and the sol remains negatively charged [up to ∼ 10⁻² N Th (NO₃)₄] This is explained by complex formation of Th-ions and sulfate ions whereby ionic species of lower charge are formed, which exert a weaker coagulation effect. In neutral solutions another maximum at lower concentration of Th (NO₃)₄ is formed which appears to be the usual coagulation maximum produced by hydrolyzed thorium ions. The antagonistic effects of the salt pair Th (NO₃)₄-K₂SO₄ upon the coagulation of silver halides has been discussed and we have concluded that the large effects repeatedly reported can be explained not by simple electrostatic effects of ions in solution but rather by the formation of complexes between Th- and SO₄-ions.

---

Zusammenfassung Die Koagulationseffekte des Thoriumnitrats in Anwesenheit von Kaliumnitrat und Kaliumsulfat an Silberhalogenid-Solenin statu nascendi wurden ausführlich untersucht. Wenn Silberhalogenid-Sole durch Thoriumnitrat-L?sungen koaguliert werden, bilden sich zwei Koagulationsmaxima (II und IV, Abb. 1). Bei sehr niedrigen Konzentrationen des Thoriumnitrats koaguliert das Thorium-Ion (oder Komplex) die negativen Silberhalogenid-Sole, w?hrend bei h?heren Thoriumnitrat-Konzentrationen die ungeladenen Sole durch die NitratIonen koaguliert werden. Zwischen den zwei Maxima besteht ein weites Gebiet der stabilen umgeladenen Sole (III). Unter dem Zusatz von konstanten Mengen des Kaliumnitrats wird in diesem Gebiet ein neues (drittes) Maximum gebildet (Abb. 2–5), das auch als Koagulationsmaximum identifiziert wurde. Es wird angenommen, da? dieses Maximum wieder eine Koagulation der umgeladenen Silberhalogenid-Sole durch Nitrat-Ionen darstellt. Das Auftreten von zwei Koagulationsmaxima, verursacht durch Nitrat-Ionen, wird durch die verschiedenen Ladungsdichten an Solteilchen in Gebieten der Thoriumnitrat-Konzentrationen, in denen Maxima erscheinen, erkl?rt. Die M?glichkeit eines Koagulationseffektes der komplexen Ionen zwischen Thorium und Nitrat wurde ausgeschlossen, da die Gleichgewichtskonstante solcher Komplexe ziemlich niedrig ist. In Anwesenheit von Kaliumsulfat sieht die Koagulationskurve für Silberhalogenid Sole sehr unterschiedlich aus (Abb. 6–8). In den mit Salpeters?ure (0,001N) versetzten Solen erscheint nur ein Maximum bei ziemlich hohen Thoriumnitrat-Konzentrationen [∼ 10⁻³ N Th (NO₃)₄], wobei die Solteilchen noch immer negativ sind. Da Thorium- und Sulfat-Ionen sehr stabile Ionen-Komplexe bilden, die eine niedrigere Valenz aufweisen, kann das Maximum als Folge der Koagulationseffekte solcher Komplexe an die Silberhalogenid-Sole angesehen werden. In neutralen L?sungen zeigt sich neben dem beschriebenen Maximum noch ein anderes Maximum bei niedrigerer Thoriumnitrat-Konzentration. Dieses Maximum, hervorgerufen durch die hydrolysierten Thorium-Ionen, scheint das „normale“ Koagulationsmaximum zu sein. Dieantagonistischen Effekte des Salzpaares Th (NO₃)₄-K₂SO₄ bei der Koagulation der Silberhalogenide wurden diskutiert, und es wurde geschlossen, da? die gro?en Effekte, die wiederholt ver?ffentlicht worden waren, sehr schwer nur durch die elektrostatischen Anziehungen zwischen den Ionen erkl?rt werden k?nnen. Die Komplexbildung zwischen Thorium- und Sulfat-Ionen wird für den sogenannten antagonistischen Effekt in diesem Falle als verantwortlich angesehen.

---

---

Supported in part by U.S. Atomic Energy Commission Contract No. AT (30-1)-1801.     

Electrochemical deposition of copper on steel from a solution of diacido-1,3-propylenediamine-N,N′-diacetato-N,N′-dipropionate cuprate(II)

The possibility of obtaining smooth homogeneous copper coatings with good adhesion and homogeneous copper coatings with poor adhesion by electrochemical deposition of copper on steel from a solution of nontoxic copper(II) complex with the ligands, 1,3-propylenediamine-N,N′-diacetato-N,N′-di-3-propionic acid, was analyzed. For both types of coatings, the optimum composition of the solution and the optimum deposition conditions were determined.     

Bis(PheOH) maleic acid amide-fumaric acid amide photoizomerization induces microsphere-to-gel fiber morphological transition: the photoinduced gelation system

The photoinduced gelation system based on 1 (non-gelling) to 2 (gelling) molecular photoisomerization in water results by microspheres (1) to gel fibers (2) transformation at the supramolecular level.     

Ground-state properties of benzenoid hydrocarbons by simple bond orbital resonance theory approach

π-electron energies and bond orders of benzenoid hydrocarbons with up to five fused hexagons have been considered by the simple Bond Orbital Resonance Theory (BORT) approach. The corresponding ground states were determined according to four BORT models. In the first three models a diagonalisation of the Hückel-type Hamiltonian was performed in the bases of Kekulé, of Kekulé and mono-Claus and of Kekulé and Claus resonance structures, respectively. In the fourth model a simple BORT ansatz was used. According to this ansatz, the ground state is a linear combination of the positive Kekulé structures, all with equal coefficients. It was shown that π-electron energies and bond orders obtained by these models correlate much better with the PPP energies and bond orders than with the Hückel energies and bond orders. This indicates that a simple BORT approach is quite reliable in predicting the more sophisticated PPP results. Concerning the relative performance of the four BORT models, the best results were obtained with the BORT ansatz. The performance deteriorates with the expansion of the basis set. This is attributed to the fact that in these models the improvement of the basis set is not accompanied with the corresponding improvement of the Hamiltonian. Comparing the BORT-ansatz bond orders with the Pauling bond orders, it was shown that BORT-ansatz bond orders correlate much better with the PPP bond orders. This revised version was published online in July 2006 with corrections to the Cover Date.     

Modification of solids with volatile organics III: Natural zeolites

Summary The effect of pre-adsorbed benzene and ethanol on the adsorptive properties of natural zeolite (clinoptilolite) has been studied by gas-solid chromatography. It has been shown that modification of the solid surface by volatile organics has a significant influence on the adsorptive properties. The modification is of the same order as the more difficult modification by inorganics, as illustrated here by clinoptilolite modification with Co²⁺. Energy distribution of surface adsorptive sites appears to be continuous and confirms previous finding that only a small proportion of active sites is responsible for most adsorbate retention. Part II reference [4]     

Hybridization in some macrocyclic polyacetylenes

The hybridization in several cyclic polyacetylene compounds has been calculated by the maximum overlap method, assuming planar and non-planar geometries of the molecules. In the planar configuration the hybrids describing the molecular skeleton deviate from the corresponding bond directions. We have a few “bent” bonds, but in contrast to the situation in small rings, here the deviation angles are negative, i.e., the hybrids point toward the inside of the ring. Non-planar structures in which acetylene groups are kept in a plane and CCH₂ or CH₂ groups are displaced out of the plane show less deviation from the bond directions of bent bonds. Furthermore, the deviation angles decrease with an increase in the out-of-plane displacement of methylene groups. Finally, when the angle of bending of the molecules approaches 50°, the deviation vanishes, predicting a puckered conformation for the molecules. Correlation between CC stretching vibration frequencies and the corresponding CC bond overlap is discussed.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

A new approach to predict the biological activity of molecules based on similarity of their interaction fields and the logP and logD values: application to auxins

The activity of a biological compound is dependent both on specific binding to a target receptor and its ADME (Absorption, Distribution, Metabolism, Excretion) properties. A challenge to predict biological activity is to consider both contributions simultaneously in deriving quantitative models. We present a novel approach to derive QSAR models combining similarity analysis of molecular interaction fields (MIFs) with prediction of logP and/or logD. This new classification method is applied to a set of about 100 compounds related to the auxin plant hormone. The classification based on similarity of their interaction fields is more successful for the indole than the phenoxy compounds. The classification of the phenoxy compounds is however improved by taking into account the influence of the logP and/or the logD values on biological activity. With the new combined method, the majority (8 out of 10) of the previously misclassified derivatives of phenoxy acetic acid are classified in accord with their bioassays. The recently determined crystal structure of the auxin-binding protein 1 (ABP1) enabled validation of our approach. The results of docking a few auxin related compounds with different biological activity to ABP1 correlate well with the classification based on similarity of MIFs only. Biological activity is, however, better predicted by a combined similarity of MIFs + logP/logD approach.     

Determination of boron in nuclear materials by isotope dilution technique. Part I

Summary The application of the mass-spectrometric stable-isotope dilution technique for the determination of microgram and submicrogram quantities of boron in nuclear materials is described. An adequate amount of spike solution (enriched in¹⁰B) is added to the sample and the mixture is treated chemically to ensure isotopic equilibration. Boron is then separated as methyl borate by distillation from phosphoric acid and converted into sodium tetraborate suitable for isotopic analysis by surface ionization in a mass spectrometer. The results for boron content in a standard boric acid solution, reagents, ammonium diuranate, uranium dioxide, sintered pellets of UO₂ and uranyl nitrate are given. Owing to the simplicity, accuracy and high precision a possible application of the method would be its use for routine boron determinations in a natural uranium processing plant and/or as a standard method for intercomparison with other analytical methods.

---

Zusammenfassung Die Anwendung der massenspektrometrischen Isotopenverdünnungsmethode auf die Borbestimmung im Bereich von Mikrogramm und darunter in Reaktormaterialien wurde beschrieben.Eine entsprechende Menge von angereichertem¹⁰B wird einer Probe zugegeben und die Mischung zur Herstellung des Isotopengleichgewichtes chemisch behandelt. Das Bor wird dann als Methylborat durch Destillation aus der phosphorsäurehaltigen Lösung abgetrennt und zum Zweck einer massenspektrometrischen Isotopenanalyse in Natriumtetraborat umgesetzt.Der Borgehalt in H₃BO₃-Standardlösungen, Reagenzien, Ammoniumdiuranat (ADU), UO₂, gesinterten UO₂-Pastillen und Uranylnitrat wird angegeben. Wegen der Einfachheit, Genauigkeit und Empfindlichkeit könnte diese Methode sowohl für die routinemäßige Borbestimmung bei der Herstellung von Brennstoffelementen mit natürlichem Uran als auch für die Standardisierung analytischer Methoden angewandt werden.

     

Theoretical study of cyclic conjugation in phenes: Some hitherto unnoticed features

Summary Cyclic conjugation in phenes is examined by means of theBosanac-Gutman-Aihara method. In contrast to the predictions based on the analysis ofKekulé orClar structures, we find that when going along the hexagons of a phene molecule, cyclic conjugation varies in a rather non-uniform manner. In contrast to a number of other homologous series of benzenoid hydrocarbons, the intensity of cyclic conjugation in phenes increases when going towards the center of the molecule.

---

Theoretische Untersuchung der cyclischen Konjugation in Phenen: Einige bisher unbekannte Eigenschaften

Zusammenfassung Die cyclische Konjugation in Phenen wird mittels derBosanac-Gutman-Aihara-Methode untersucht. Im Gegensatz zu auf der Analyse vonKekulé- oderClar-Strukturen beruhenden Voraussagen variiert die cyclische Konjugation entlang der Sechsecke eines Phenmoleküls ziemlich unregelmäßig. Anders als bei anderen homologen benzenoiden Kohlenwasserstoffen nimmt bei Phenen die Intensität der cyclischen Konjugation zum Zentrum des Moleküls hin zu.